Disco Head Board

The King Size Disco Headboard features oak veneer side tables, and timber bed slats.

Suits an Australian standard King Size Mattress, 183 x 203 cm (6'0" x 6'8") Headboard can be attached to the wall.

Requires 2 people to assemble.

Disco Bed Base Assembly Instructions

Disco Headboard Assembly Instructions

Disco Headboard Bedsides Assembly Instructions

Bed Heads

Our Rattan bed heads according to size, measure the width (to fit mattress). Suits a mattress and base at height 60cm.

Light-weight, sturdy and simple to assemble, our bed heads simply lean flat against the wall with the bed pushed up against it.

Patio Chairs

Our Patio Chairs come in 2 parts, chair base (rattan or poly patio seat) and metal chair legs. We supply metal washers & nuts. A shifting spanner is required to attach the base and legs together.

Note* For items that required initial assembly, we recommend retightening bolts every three months to ensure stability.

Print our step by step Assembly Instructions for our Patio Chairs here.

Assembly Instructions Patio Chairs

Light Shades

Each of our light shades comes with a wire frame with a 30mm round open disk suitable for a BC Bayonet globe holder. You may use an existing installed light fitting similar to those pictured here, or you will need a licensed electrician install a new fitting.

Note* We supply the light shade only, the suspension kit light fitting is sold separately.

Unscrew the lower part of the globe holder.
Insert the light fitting through the light shade disk.
Gently screw the remainder of the globe holder until firm and the job is done!

Print our step by step Assembly Instructions for Light Shades here.

Assembly Instructions Light Shades

Zulu Counter & Bar Stools // Zulu, Cafeteria & Pacific Dining Chairs

Our Zulu Counter & Bar Stools, Zulu, Cafeteria & Pacific Dining Chairs come in 2 parts, chair base (rattan or poly rattan seat) and metal chair legs. We supply metal washers & nuts. A shifting spanner is required to attach the base and legs together.

Note* For items that required initial assembly, we recommend retightening bolts every three months to ensure stability.

Print our step by step Assembly Instructions for Zulu Counter & Bar Stools, Zulu, Cafeteria & Pacific Dining Chairs here.

Assembly Instructions Zulu-Cafeteria & Pacific Stools & Dining Chairs

Love Chairs

Our Love Chair comes in 2 parts, chair base (rattan petal seat) and timber chair legs. We supply 4 screws. A screw driver and/or power drill is required to screw the base and legs together.

Print our step by step Assembly Instructions for Love Chairs document here.

Assembly Instructions Love Chair

Sling Back Chairs & Sofas

Our Sling Back Chair & Sofas come in 2 parts, chair base (rattan sling seat) and metal chair legs. We supply screws & clamps screws. A screw driver and power drill is required to screw the base and legs together.

Note* For items that required initial assembly, we recommend retightening bolts every three months to ensure stability.

Print our step by step Sling Back Chair & Sofa Assembly Instructions here.

Assembly Instructions Sling Back Chair & Sofa